ROM STOCK [HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red warning)

Thảo luận trong 'HTC M7' bắt đầu bởi Sơn Hoài Paladin, 23/11/17.

  1. Sơn Hoài Paladin

    Sơn Hoài Paladin Administrator
    Quản Trị Viên

    Tham gia:
    30/10/17
    Bài viết:
    263
    Thích đã nhận:
    24
    OP UPDATE: DON'T reboot your device until you get a success message, also double check you understand EVERY STEPS before trying it out. I AM NOT RESPONSIBLE FOR ANYTHING IF YOU MESS UP THE STEPS...!!

    This firmware is WITH OUT the development disclaimer overlay:

    This build is for
    development purposes only
    Do not distribute outside of HTC
    without HTC's written permission.
    Failure to comply may
    lead to legal action.


    ** With Latest Radio **

    Upgrade your HTC Sync to 3.1.13.0 if you flash this firmware..


    Đăng nhập để thấy được liên kết --md5: -- dd9f5fb8416de0fb6f533ce3e40bbafe

    These Firmwares DO NOT delete the contents in SD Card. But please make a back up before flashing for safety.


    **N.B. Thanks and Donations are most welcome ** [​IMG]


    Requirements for flashing: S-OFF
    • Please Follow the instructions carefully!! Otherwise you may BRICK your device.
    • Please note that it is for the HTC One M7 UL Only. Not Tested with Sprint Version!!
    • You may change the MID (at your own risk) in the android-info.txt attached and replace the one inside the firmware.zip if you have another MID.
    • If you have Super CID "11111111", you don't need to worry about the CID lists inside the android-info.txt file

    DON'T FORGET TO CLICK THANKS IF YOU FIND THIS THREAD USEFUL. [​IMG]


    Dear All,

    I have noted a lot downloads of the firmware and most of them just don't even bother clicking thanks [​IMG]

    I appreciate your encouragements and appreciation for my work so that it will give motivation to keep all you updated.

    Thanks a lot for everyone contributed..

    [​IMG]

    Thanks @Đăng nhập để thấy được liên kết for this video tutorial


    To Check ModelIDs:

    Code:
    adb reboot bootloader
    ----- Mobile reboots---

    Code:
    fastboot getvar all
    ----Check the following line in the command window: INFOmodelid: PN0714000----


    Steps for flashing:

    -----

    Windows users, need to do these steps first:
    - move the file you downloaded and renamed (firmware.zip) to the C:\adb\ folder.
    - next, in the C:\adb\ folder hold down SHIFT key and RIGHT-CLICK and select "Open command window here".

    -----

    Next, plug in phone to PC and type this in terminal/command prompt:

    Code:
    adb reboot bootloader
    ----- Mobile reboots---

    Now type:

    Code:
    fastboot reboot-bootloader
    After that, type:

    Code:
    fastboot oem rebootRUU

    Note: You should see a silver HTC logo come up on your phone after executing this command.
    Note: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.

    Repeat the same command: !! IMPORTANT !! -- PLEASE WAIT A FEW SECONDS BEFORE ISSUING THE COMMAND AGAIN; Otherwise the cmd prompt will be non-responsive saying "Sending data...", If this happens, try disconnecting the USB cable and reconnect.

    Đăng nhập để thấy được liên kết --md5: -- 6734d095499a72519335bb894503708f

    Đăng nhập để thấy được liên kết --md5: -- 8f3a59cdbcc84b9ff2319495eee6ae98

    Đăng nhập để thấy được liên kết --md5: -- DE93220BEB19CA1FCB3FDF407F2B3D3F


    Đăng nhập để thấy được liên kết --md5: 30772981922e19437085c92adbea9658 --

    Đăng nhập để thấy được liên kết --md5: 49dbb024b28a17383da35593d6cbc860 --



    Đăng nhập để thấy được liên kết ** --md5: 227c88abad17dba0561a91ad6d353373 --


    Đăng nhập để thấy được liên kết ** --md5: c9b68c6a17ae323112c99ce0550dba38 --

    Previous firmware with modified HBOOT,
    Firmware 3.62.401.1 with NO Red Warning
    are below.

    Đăng nhập để thấy được liên kết --md5: 728e3dc18abde0fd10835376332f81ec --

    Đăng nhập để thấy được liên kết -- md5: 7fb62e47f347ae05baf4dd821b497752 --

    Đăng nhập để thấy được liên kết --md5: 7ab96062ff848550a45dd035967adc83 --

    Đăng nhập để thấy được liên kết -- md5: 6bcb6dd99da4d4c73a24725b814e161b --

    Đăng nhập để thấy được liên kết -- md5: 6b2d5bf151ddf6ebbb7c6303f6db1889 --

    Đăng nhập để thấy được liên kết

    Đăng nhập để thấy được liên kết

    Đăng nhập để thấy được liên kết

    Đăng nhập để thấy được liên kết


    Đăng nhập để thấy được liên kết

    Đăng nhập để thấy được liên kết for Android 4.2.2


    Possible Errors while flashing:
    If it says "FAILED" do not immediately reboot the device. If you reboot with a FAIL it could brick your device! Listed below error are safe to reboot:
    If you encounter one of them, you can just reboot. Nothing changes.- 12 signature fail (means a signed firmware package is required. This would only happen with S-ON phones though. but safe to reboot)
    - 23 parsing image fail (means something wrong with the image in the zip)
    - 32 header error (means the zip couldn’t be read and unzipped properly)
    - 41 Wrong Model ID (means the MODEL ID in the android-info.txt does not match with your device. you can reboot the device. You may change the MID manually in the android-info.txt at your own risk.)
    - 42 Wrong Customer ID (means you need to include the CID of your device in the android-info.txt or change the CID to superCID.)
    - 99 UNKOWN (is not yet clear but safe to reboot)

    DON'T reboot until you get a success message if you get an error bellow:
    - 90 hboot pre-update (means it only flashed hboot and you have to run the process again immediately to flash all other partitions. Don’t reboot before repeating the command. If the command window stuck in the middle for a long time, wait for a few minutes and please unplug the USB and replug it again. Repeat the command again. DON'T reboot until you get a success message.)

    Editing android-info.txt

    - Use an Editor that doesn't doesn't alter the linebreaks. Don't use Windows Notepad. Use Đăng nhập để thấy được liên kết
    - Only one MID can be in the file.
    - CID's can easily be added or removed- one per line
    To Get SUPERCID
    Code:
    fastboot oem writecid 11111111
    RUUmode:

    RUU Mode is the mode used for RUU flashes by HTC. It is different from the normal fastboot. You must flash the firmware only in RUU Mode. The RUU mode can be identified by the black background with only a silver HTC logo and if a command is being active a green progress bar will show the progress of any command being excecuted.

    For Further Reading

    Some more useful threads that might be helpful to you:
    - Đăng nhập để thấy được liên kết
    - Đăng nhập để thấy được liên kết
    - Đăng nhập để thấy được liên kết
    - Đăng nhập để thấy được liên kết
    - Đăng nhập để thấy được liên kết
    - Đăng nhập để thấy được liên kết
    - Đăng nhập để thấy được liên kết


    You must be aware that writing to the bootloader -partition increases your risk to lose the device exponentially. You understand and agree that i cannot be held responsible for such or any other damages. The flash process is theoretically safe and tested. I will not accept any responsibility. The method itself is developed by Google and HTC, i have only adapted it and you execute it. You understand that you should not do it if you are not willing to accept this risk.
     

trang này